Authorized Dealer — IndiaHigh-Pressure Fluid Power Equipment
Complete range of Haskel gas boosters, liquid pumps, air amplifiers, hydrogen compression solutions, and packaged systems — available with full local engineering support.
Single-Stage Gas Booster (AG)
AG Series
Single-acting, single-stage air-driven gas boosters — the smallest and lightest in the range. Pressures to 39,000 PSI with oil-free gas contact.
.png)
Double-Acting Gas Booster (AGD)
AGD Series
Double-acting, single-stage gas boosters for higher flow rates and efficient compression. Models AGD-4 through AGD-152, up to 35,000 PSI.
Two-Stage Gas Booster (AGT)
AGT Series
Two-stage gas boosters for high compression ratios. Models AGT-7/30 through AGT-62/152. Outlet pressures to 36,000 PSI.
AGD Series 8 Gas Booster
AGD Series 8
Extended-stroke double-acting gas boosters for higher volume output per cycle. 8-inch stroke models for applications requiring maximum gas throughput.
AGT Series 8″ & 14″ Gas Booster
AGT Series 8/14
Extended-stroke two-stage gas boosters with 8-inch and 14-inch stroke options. Maximum throughput for high-ratio, high-volume gas compression.
Hydraulic Driven Gas Booster
H-Drive Series
Hydraulically driven gas boosters for continuous-duty industrial applications. Higher cycle rates, consistent output, and suitability for production environments.
H-Drive Two-Stage Gas Booster
H-Drive Two-Stage
Two-stage hydraulically driven gas boosters for high compression ratios in continuous-duty applications. Higher output pressures than single-stage H-Drive models.
Oxygen Gas Booster
AGD-Oâ‚‚ Series
Oxygen-compatible gas boosters with ASTM G-93 cleaned components. For medical, aviation, diving, and industrial oxygen service up to 4,500 PSI.
Nitrogen Bootstrap System
NBS Series
Packaged nitrogen boosting systems for laser cutting, nitrogen supply, and on-demand Nâ‚‚ pressure boosting. Eliminates high-pressure cylinder rental.
Q-Drive Electric Gas Booster
Q-Drive Series
Servo electric-driven gas boosters with IoT connectivity. Up to 6,500 PSI (450 bar) with 95% efficiency. Remote monitoring, data logging, and precise pressure control.
Q-DriveX Electric Hydrogen Compressor
Q-DriveX Series
ATEX/IECEx certified electric servo hydrogen gas compressor. Designed for both inert and explosive gases including hydrogen. Precise pressure and flow control with IoT connectivity.
M-Series Liquid Pump (0.33 HP)
MS Series
Miniature 0.33 HP air-driven liquid pumps. Compact stainless steel construction, pressures to 8,800 PSI. Ideal for lab and light-duty applications.
Standard Liquid Pump (0.75 HP)
DSF Series
0.75 HP air-driven liquid pumps for general industrial pressure testing, fluid transfer, and pressurization up to 21,750 PSI.
High-Pressure Liquid Pump (1.5 HP)
DSHF-1.5 Series
1.5 HP double-acting liquid pumps for high-pressure applications up to 43,500 PSI. Smooth flow with dual piston design.
High-Pressure Liquid Pump (2–2.2 HP)
DSHF-2 Series
2 and 2.2 HP heavy-duty liquid pumps for extreme pressure generation up to 100,000 PSI. For industrial hydrostatic testing and research.
Liquid Pump (3 HP)
ASFD Series
3 HP air-driven liquid pumps. Models ASFD-10, -35, -60, -100, -150, -202 for high-flow hydrostatic testing, pressure holding, and fluid transfer.
High-Flow Liquid Pump (6 HP)
6HP Series
6 HP air-driven liquid pumps for high-flow industrial applications. 10 models across 4 ratios for large-volume pressurization.
High-Flow Liquid Pump (8 HP)
8HSFD Series
8 HP air-driven liquid pumps for demanding high-flow and high-pressure applications. Continuous-duty rated.
High-Flow Liquid Pump (10 HP)
HF Series
10 HP — the highest horsepower in the Haskel liquid pump range. Maximum flow rates for rapid pressurization of large systems.
Refrigerant Pump
Refrigerant Series
Air-driven pumps for recovery and recharge of liquid and vapor refrigerants. Up to 1,250 PSI with vacuum capability to 27" Hg.
Single-Acting Air Amplifier
AA Series
Single-acting air pressure amplifiers. Ratios from 2:1 to 75:1, max 4,500 PSI. Compact, no electricity, automatic stall at set pressure.
Double-Acting Air Amplifier
AAD Series
Double-acting air amplifiers for continuous-flow applications. Smoother output with less pressure pulsation. Ratios from 2:1 to 5:1.
Two-Stage Air Amplifier
AAT Series
Double-acting, two-stage air amplifiers for higher compression ratios from low-pressure shop air. Ideal when single-stage ratios are insufficient.
Breathing Air Amplifier
HAA Series
Clean air amplifiers for SCBA cylinder filling, breathing air systems, and emergency responder equipment. Portable and fixed configurations.
4AAD-2 Double Acting Air Amplifier
4AAD-2 Series
4-inch bore double-acting air amplifier for higher flow capacity. Continuous output with reduced pulsation for demanding pneumatic applications.
8AAD-2 Double Acting Air Amplifier
8AAD-2 Series
8-inch bore double-acting air amplifier — the largest in the Haskel range. Maximum air flow output for high-demand pneumatic systems.
Haskel Stainless Steel Check Valve
Haskel CV
Haskel-branded stainless steel check valves, 1/4" to 2". Up to 15,000 PSI hydraulic / 10,000 PSI gas service. PTFE seat seal.
Air Pilot Switch
Style A/B/C
Pressure switches producing pneumatic signals up to 150 PSI. Three styles (A, B, C) for automatic start/stop control of Haskel pumps and boosters.
Directional Control & Release Valve
Haskel DCV
Air-operated directional control and release valves with poppet/ball design. For remote operation in wet, hazardous, or limited-access areas.
Hydrogen Gas Booster
Hâ‚‚ Booster
Air-driven hydrogen gas boosters with embrittlement-resistant brass gas-contact surfaces, special Hâ‚‚ seals, and integrated safety interlocks.
NANO Hydrogen Refuelling Station
NANO
Entry-level hydrogen refuelling station for industrial applications. Uses existing compressed air supply for simple integration. Compact footprint.
GENO Hydrogen Compression System
GENO
High-capacity hydrogen compression system for large-scale fueling. Up to 2,500 kg/day at 700 bar. Available in 20ft and 40ft container configurations.
H-Drive System Module (HSM)
HSM
Hydrogen compression skid using H-Drive hydraulic technology. Up to 950 bar output, 63 kg Hâ‚‚/hr throughput. Models SK1 and SK2.
Roll Bar Gas Booster System
Roll Bar
Single pneumatic gas booster in a rugged tubular stainless steel frame. Up to 1,379 bar (20,000 PSI). Portable, self-contained system.
Multiple Booster Roll Bar System
Multi Roll Bar
2, 3, or 4 booster roll bar system for higher flow rates and continuous-duty gas compression. Up to 1,379 bar.
Case Mounted Gas Booster System
Case Mounted
AG series gas booster in a rugged Pelican-style carry case. Up to 700 bar (10,000 PSI). Truly portable for field service.
Helium Gas Booster System
He Booster System
AGD/AGT booster packaged for helium service. Up to 620 bar. Leak testing, balloon filling, and specialty gas applications.
Bottle Mounted Air/Gas Booster System
Bottle Mount
Air/gas booster that mounts directly on a gas cylinder. Up to 635 bar (9,200 PSI). No bench or frame required.
Vessel Mounted Air Amplifier System
Vessel Mount
AAD air amplifier mounted on a 25-litre receiver vessel. Up to 25 bar output. Packaged for clamping, actuation, and air tool supply.
6HP Test Pac Liquid Pump System
6HP Test Pac
Transportable 6 HP liquid pump system for hydrostatic testing up to 690 bar (10,000 PSI). Complete with controls, gauges, and safety valves.
3HP Test Pac Liquid Pump System
3HP Test Pac
Portable 3 HP liquid pump system for high-pressure testing up to 3,000 bar (43,500 PSI). Compact, field-deployable design.
0.33HP Test Pac Liquid Pump System
0.33HP Test Pac
Compact 0.33 HP liquid pump system for laboratory and light-duty hydrostatic testing. Up to 1,000 bar. Manual or air-driven options.
Genuine Haskel Spare Parts & Seal Kits
OEM Parts
Factory-authorized OEM spare parts, seal kits, and replacement components for all Haskel pumps, gas boosters, and air amplifiers. Manufactured to precise OEM specifications for guaranteed compatibility and peak performance.
Aftermarket Services & Support
ServiceONSITE
Comprehensive aftermarket support including ServiceONSITE maintenance, PartsONSITE genuine parts coverage up to 5 years, oxygen repair services, and global technical support backed by Ingersoll Rand.